Computer doesn't boot :

NOTE: Before making any attempt to remove or replace any part inside the casing, ensure that the power is off.

The first thing that might be causing this is your memory (RAM). Try to remove it and place it in another memory slot on the motherboard.

To be sure if your motherboard is still in good working condition, remove the memory and power on the PC.

You should hear continuous beep sounds.

If you hear this then your motherboard is fine.

If placing the memory in another slot does not work then the problem lies with the memory itself. You will need to replace it.

It could also be that some faulting PCI cards are causing this error.

Try to remove your PCI cards. Normally a faulting PCI modem causes this type of error. Remove it and then power on the pc.

The processor could be faulty so to check it remove the CPU Cooler fan then turn on the PC. Place your finger on the processor for 2 seconds. You should find the processor heating up. Then turn it off immediately. If this works then your processor is good.

Remember not to leave it ON for more than 5 secs.

Perhaps you are having static problem with the memory card

You'll need an eraser to remove the static energy found on your memory. Rub the eraser on the gold plated part of the memory (on both sides). That is the part which come into contact with the internal pins in the memory slot on the motherboard.

Thanks to DJ Akshay

(back to list)